Foma P905i, Руководство пользователя

Страница: 53 / 140

51
V
o
ic
e/
Vi
deop
ho
n
e
Call
s
Information
p If you hear the guidance requesting your caller ID (see
page 369), follow the steps of “To notify your caller ID” on
page 48 to enter “186” and redial.
p When the Flat-plug Earphone/Microphone with Switch
(option) is connected, you can hear the other party’s voice
from the earphone. (See page 346)
p
If you close the FOMA phone during a call, the FOMA
phone works in accordance with the setting of “Setting when
folded”. (See page 63)
p If you switch to Horizontal Open Style during a call, the
FOMA phone is set to “No tone”. (See page 63)
p
You can press numeric keys to send touch-tone signals
during a call. During a Chara-den call, you need to switch to
DTMF Transmission Mode. (See page 71)
p You cannot make a call in Horizontal Open Style. However,
when the Flat-plug Earphone/Microphone with Switch
(option) is connected, you can make a call in Horizontal
Open Style.
p
In Dual Mode of 2in1, you can make a call after selecting
Number A or Number B. (See page 374)
<For Voice Calls>
p
You can make a voice call also by pressing
- d
and then
entering the party’s phone number. If you enter a wrong
number, press
- h
to clear the display and then redial.
<For Videophone Calls>
p Just after purchase, Hands-free is automatically activated
by “Hands-free w/ V. phone” (see page 71). However,
Hands-free is deactivated during Manner Mode regardless
of “Hands-free w/ V. phone”.
p
When you make a videophone call with substitute image,
note that you will still be charged for the digital
communication, not the voice calls.
p If you make a videophone call at 110/119/118 from the
FOMA phone, it is automatically dialed out as a voice call.
p
During a videophone call, you can send a Chara-den image
to the other party instead of the image through your camera.
(See page 69)
p The international videophone call is available using the
DoCoMo international call service “WORLD CALL”. (See
page 57)
■ Display during dialing
The other party’s name and icon will be displayed if the
party’s phone number and name are stored in the
Phonebook. However, the image will not be displayed, even
if it is stored in the Phonebook.
p If the same phone number is stored with multiple names in
the Phonebook, the name that comes first in the search
order (see page 89) is displayed.
p The phone number instead of the name will be displayed if
the Phonebook entry has been stored as secret data, or if
Personal Data Lock is activated.
■
If you entered a wrong phone number
Each time you press
r
, the digit on the far right is
cleared. If you press and hold
r
for at least one second,
all the digits are cleared and the Stand-by display returns.
p
Press
N o
to move the cursor to the digit you want to clear,
and then press
r
to clear it. To clear all the digits on
and to the right of the cursor, press and hold
r
for at
least one second.
■
If a videophone call could not be connected
The reason why it could not be connected is displayed. (The
displayed reason might not be the same as the actual
reason depending on the type of the other party’s phone and
contract for network services.)
Messages Reasons
Check number,
then redial
You have dialed a non-existent phone
number.
Busy The other party is busy. (Depending
on the receiver’s phone, this message
might be displayed during packet
communication as well.)
Busy with packet
transmission
The packet communication is
progress at the other end.
Out of service area/
power off
The other party’s phone is out of the
service area or turned off.
Set caller ID to ON Your caller ID is not notified.
(when dialing “visualnet”)
Your call is being
forwarded
During forwarding
Redial using voice
call
The other party activates Call
Forwarding Service but the forwarding
destination phone does not support
videophone calls.
Upper limit has
been exceeded
Connection failed
The upper limit for the plan with the
limit function (Type Limit, Family Wide
Limit) is exceeded.
Please make your
call from the i-mode
web page
You did not make a videophone call
from the IP (Information Provider) site
among i-mode official sites (at dialing
to V-live).
Connection failed Redial after setting “Activate” of
“Caller ID notification” to “ON”.
・ This may appear in the case other
than above.
ᵡᶍᶌᶒᶇᶌᶓᶃᶂ