FOLSOM PresentationPRO PS-2001, Инструкция по установке и эксплуатации

Страница: 30 / 54

Beta 50, Beta 60, MII, and EBU Color Balance Submenus
This menu allows the operator to adjust saturation on Beta 50, Beta 60, MII, and EBU input sources. Parameters
entered by the operator are saved as part of the input configuration file for the corresponding video input channel.
BETA COLOR BALANCE
SATURATION 100.0%
RESET COLOR
To perform adjustments, scroll to the Saturation menu line, select the menu item with the SEL key and then turn the
ADJUST control to select the desired saturation level while viewing the output screen. Press SEL or ESC to exit the
edit mode. The adjustment range for saturation is 50.0% to 200.0%.
The Reset Color menu item resets all the fields in this sub menu to the default values. To reset the saturation
controls, scroll to the Reset Color menu line and select the menu item with the SEL key. The saturation parameter will
be reset to 100.0%.
Processing Submenu
The Processing menu line is used to call up a submenu. Scroll to the Processing menu line and press the SEL key to
display the Processing submenu.
PROCESSING
SYNC SELECT AUTO
DC RESTORE PRCH
DE-INTERLACER DIS
3:2 SEQ DET EN
VID BW FULL
VID PEAKING MIN
Sync Select
The Sync Select menu item allows the user to select one of four different modes (Auto, H/V, Comp or SOG). In Auto
Mode, the unit will examine the incoming sync signals and automatically select the active sync source. Auto is the
normal default setting. The user can select H/V (separate H and V sync), Comp (separate Composite sync), or SOG
(Sync-On-Green) modes to override the automatic sync selection. This is sometimes desirable if the input signals are
noisy.
DC Restore
The DC Restore menu item allows the user to select one of two DC Restoration modes (Prch or Sync). The default
mode is DC Restoration to the back porch of the incoming video signal. The Sync Mode selects DC Restoration to
the sync interval and may be useful for videos without a back porch interval.
De-Interlacer
This menu item is applicable only for NTSC or PAL input video. The De-Interlacer should be enabled (EN) for optimal
performance with full-motion video. The De-Interlacer can be disabled by selecting the DIS (disable) mode. Delay
through the system is affected by these settings as follows: with the De-Interlacer enabled input to output delay is 2
frames while it’s disabled delay is only a ½ frame.
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 21