FOLSOM PresentationPRO PS-2001, Инструкция по установке и эксплуатации

Страница: 47 / 54

Description: Selects the video input source and switches to this input using the currently selected transition
type. An input source selection of 8 will display the Logo if one is stored in non-volatile memory, or
black if no logo has been stored.
Parameters: n - Input Source; [1-8]
Query:
RTE?
Returns the Video Input Source in the format:
=n
Example: RTE 5 (Select input source 5.)
RTE? (Returns the input source.)
Command:
STAT?
Description: Print System Status value
Parameters: None
Example:
STAT? (Returns a system status value for factory use.)
Command:
SYSAVE
Description: Saves the system parameters to non-volatile RAM. The system parameters
stored are the output format, sync, and frame rate, the audio parameters, the effects
parameters, serial port configuration parameters and the front panel lock out mode. Upon
power up, the system parameters stored in non-volatile RAM are used for system
configuration.
Parameters: None
Example:
SYSAVE (System parameters are saved to non-volatile RAM.)
Command:
TRM n
Description: Transition freeze mode
Parameters: n - type [I|B|?]
Query:
TRM ?
Returns the current transition freeze mode:
= n
Example: TRM I (Set the transition mode to freeze the currently displayed image.)
TRM B (Set the transition mode to display a black screen at the start of a transition.)
Command:
TRNE n
Description: Transition Edge Width for wipe-type transitions.
Parameters: n - pixel width, [2 – 32]
Query:
TRNE?
Returns the Transition Edge Width in the format:
=n
Example: TRNE 4 (Set for wipes using edge adjust width of 4.)
TRNE? (Returns the transition edge width.)
Command:
TRNM n
Description: Selects the transition type to be used when changing input sources.
Parameters: n - Transition Type:
0 = Cut
1 = Dissolve
2 = Wipe Right
3 = Wipe Left
4 = Wipe Up
5 = Wipe Down
6 = Curtain Open
7 = Curtain Close
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 38