background image

26

Condensing unit not 
running.

Compressor not 
running.

1. No power to unit.

2. Low pressure control defective, or
 incorrectly 

set.

3. Refrigerant leak.

1. Defective starting relay.
2. Defective starting capacitor.
3. Defective run capacitor
4. Defective compressor.

1. Check that circuit breakers/disconnect 
 are 

on.

2. Check control, adjust or replace.

3. Identify and repair leak.

1. Replace relay.
2. Replace capacitor.
3. Replace capacitor.
4. Replace compressor.

Step 2: Check outdoor condensing unit

Bubbles in sight 
glass and/or incorrect 
system pressures.

1. Mineral build-up on evaporator surface.

2. Dirty condenser coil.
3. Restricted airflow to condenser.
4. High outdoor temperature.
5. Defective condenser fan.
6. Low refrigerant charge.

7. Insufficient refrigerant charge for low 
 ambient 

operation.

8. Defective head pressure control valve.
9. Inefficient compressor.
10. Faulty expansion valve(s).

1. Clean evaporator with liquid icemaker
 cleaner.
2. Clean condenser.
3. Remove obstruction.
4. Verify ice production capacity.
5. Replace condenser fan.
6. Check for leaks; repair, evacuate, and 
  re-charge refrigeration system.
7. Check system charge.

8. Replace head pressure control valve.
9. Replace compressor.
10. Replace expansion valve.

Problem: Low ice production

Step 1: Check evaporator unit

Problem: Outdoor unit cycles frequently during off cycle

Step 1: Check evaporator unit

Suction pressure rises 
during off cycle.

1. Leaking liquid line solenoid valve.
2. Excessive leak back through compressor 
 valves.

1. Replace solenoid valve.
2. Replace compressor

Check system 
pressures.

1. Low refrigerant charge.

2. Low pressure control defective, or
 incorrectly 

set.

3. Tripping head pressure control.

1. Check for leaks; repair, evacuate, and
  re-charge refrigeration system.
2. Check control, adjust or replace.

3. Clean condenser, check fan motor

Problem: Outdoor unit cycles intermittently during run cycle

Step 1: Check condensing unit

Содержание MC825 Series

































Отзывы: