77
NOTE:
You can press F3:[ENDP] to enter the end point
inputting menu.
Input the end point coordinate directly, or press
F1:[READ] to recall from memory.
Press F3:[LINE] to back to the LENGTH menu
Press F4:[ENT] to confirm, you will see the line
element in the list menu.
Here EndPile means the end station of this element.
20.2.2 Input Circle Element
1. Make sure the instrument is in horizontal elements
editing menu, press F3 to display curve element
inputting menu.
Input the curve parameters, including length[Dist],
radius[Rad], azimuth[Azimuth] and turn [Turn].
2. Press F4:[ENT] key to confirm, back to the
horizontal elements menu.
Here EndPile means the end station of this element.
NOTE:
1. Normally the azimuth will calculate and display following previous element.
2. When you set the turn, move the cursor to [Turn] item, press
◄
or
►
key to shift
between Left and Right.
Line Input/END POINT
Pt#
N 100m
E 0.000m
Z 0.000m
READ LINE ENT
Type EndPile
Line 100.000
DEL LINE CIR CURV
CIRCLE INPUT
Dist 100.000m
Rad 100.000m
Azimuth 0
°
00
′
00
″
Turn RIGHT
ENT
Type EndPile
Line 100.000
Circle 200.000
DEL LINE CIR CURV
