105
23. Known Data Management
There are 6 items in known data management.
23.1 Input Known Point Coordinate by Keys
You could input or delete coordinates of known point in the active JOB by key entry or
entry from PC. The existed data you have input beforehand could be used as occupied
point, backsight point, coordinates of known point or stakeout point. The memory is
60000 points in total.
【
Procedure of Inputting known points coordinate
】
1. Press F3: [
MEM
] in the status mode to enter into
memory management.
2. Select “
2.Known data
” , job list will display.
Select one Job you want to operate, press [ENT] key
to confirm, known data menu will display, you can
see the active JOB on the second line..
3. Select
1.Key Input.
4. Input point number and coordinates. The active job
and free memory is displayed at the top right corner.
Press F4: [
OK
] to save settings and continue to input
other points. Press key {
ESC
} back to the known data
mode.
JOB6 Free 45912
Pt#
S1
N 10.500
E 11.544
Z 100.000
0
OK
0
Memory
1.JOB
2.Known data
3.Code
4.Storage Media Select
5.USB
Known data
JOB JOB6
1.Key input
2.Com input
3.Delete
4.View
5.Clear
6.Com setting
JOB selection P1
DAFENG 10
JOBFF 3000
WOMENSHI 1256
FATELU 100
KEMEN 560
JOB6
0
JOB7 0
