Fohrenbach HT95, Руководство пользователя

Страница: 5 / 15

Instruction manual HT95 www.foehrenbach.be
Date : August 2007 Documentrev. : 3 Page : 5 / 15
2. OPERATION
2.1 Operating Procedures
WARNING
To prevent hand injury, keep fingers from between the upper and lower tooling
and from between the lever and handle when closing hand tool.
1. Hold the hand tool so that the lever is on the left. With your index finger, push and
hold the terminal holder in its forward position. (See figure 2.)
2. Insert the disconnect (box) portion of the terminal, with "U" shaped barrels up, onto
the holding pin and against the pin shoulder. While holding the terminal against the
shoulder, release the terminal holder. This ensures that the terminal remains in
proper position while moving over the anvil.
3. While grasping the lever and the handle portion of the frame, insert a wire so that the
end of the insulation is centered between the wire barrel and the insulation barrel of
the terminal (see figure 3), then close the hand tool lever completely. This will crimp
the terminal to the wire(s).