FOGE VL-FLD Series, Инструкция по эксплуатации

Страница: 4 / 6

Use high intensity modes only with trigger and strobe
type lighting. Do not use product continuous mode
with high intensity.
With dip swithes
located on the
product, you can
increase the
light intensity
when it is
needed.
P4 Ver. 20.3.001
4.Electrical Connection
5. Display/Controls
Can be used without strobe, continuous
illumination mode
Due to high illumination settings, use
this mode only with strobe input with given
ON/OFF percentage.
Due to high illumination settings, use
this mode only with strobe input with given
ON/OFF percentage.
Due to high illumination settings, use
this mode only with strobe input with given
ON/OFF percentage.
Due to high illumination settings, use
this mode only with strobe input with given
ON/OFF percentage.
ON : % 100
OFF : % 0 (Standard High Intensity)
ON : % 85
OFF : % 15
ON : % 72
OFF : % 28
ON : % 60
OFF : % 40
ON : % 50
OFF : % 50 (Ultra high light Intensity)
Light ON Position Percentage
Light
Intensity
Accessories Image
Illumination
intensity
modes with
dip switches