8. Safety
System operation assumes knowledge of the assembly instructions. The
following symbols are used in these assembly instructions:
9.Liability for Material Defects
All components of the device have been checked and tested for functionality at the production
facility. However, if defects occur despite our careful quality control, FÖGE or your dealer must be
notified immediately.
The liability for material defects is 12 months from delivery.
Within this period, defective parts, except for wearing parts, will be repaired or replaced free of
charge, if the device is returned to FÖGE with shipping costs prepaid. Any damage that is caused by
improper handling, the use of force or by repairs or modifications by third parties is not covered by
the liability for material defects. Repairs are carried out exclusively by FÖGE.
Further claims can not be made. Claims arising from the purchase contract remain unaffected. In
particular, FÖGE shall not be liable for any consequential, special, indirect or incidental damage. In
the interest of further development, FÖGE reserves the right to make design changes without
notification.
10. Decommissioning, Disposal
Remove the power supply and output cable on the sensor.
Incorrect disposal may cause harm to the environment.
Dispose of the device, its components and accessories, as well as the packaging materials in
compliance with the applicable country-specific waste treatment and disposal regulations of the
region of use.
Indicates a hazardous situation which, if not avoided, may result
in minor or moderate injury.
Indicates a situation that may result in property damage if not
avoided.
Indicates an electrical shock if not avoided or properly follow
comments.
P6
Ver. 20.3.001
