Focusrite vocaster two Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 34

Focusrite vocaster two Скачать руководство пользователя страница 22

focusrite.com

Tell the world

22

NOTE

: Vocaster Two cannot pair with

Bluetooth headphones. Vocaster’s
Bluetooth feature is for streaming
Bluetooth audio from a device to the
Vocaster and sending Bluetooth audio
back to your phone so your guest can
hear you.

You can break the Bluetooth connection in
three ways.

• Press the button on Vocaster’s

rear panel. When you turn Vocaster’s
Bluetooth connection back on again,
the previously connected device
reconnects.

• Turn off Bluetooth on your device. Next

time you re-enable Bluetooth on your
device, the device reconnects with
Vocaster.

• In your device’s Bluetooth settings,

select the Vocaster and choose the
option to Forget Device. (Note the
description of this option varies
between devices.)

What do the Bluetooth icon’s colours mean?

– Grey - Bluetooth is off. Press the

button on the back panel to turn on

Bluetooth.

– Orange - Bluetooth is on but not

connected to a device. If you’ve paired your
device before, make sure it has Bluetooth
enabled and is in range of the Vocaster.

If you’ve not previously paired your Bluetooth
device, follow the steps above to pair it for
the first time.

– Pulsing White - Vocaster is in

pairing mode. To pair a device, start from
step 3 above.

– Red - Bluetooth connection has failed.

Press the button to turn off Bluetooth on
your Vocaster, re-enable Bluetooth on your
device and repeat the steps above. If the
Bluetooth icon stays red, please contact our
support team.

– Blue - Vocaster has paired and the

a device is ready to stream audio to the
Vocaster. To disconnect, press the button,
or disable Bluetooth on your phone/device.

Vocaster Two’s Bluetooth icon

EXAMPLES OF USE

«
...
20
21
22
23
24
...
»

Содержание vocaster two



































Отзывы:

Нет отзывов