Original User Guide | Groove Go Pedelec Version 2
EN-37
6.2
Technical details
Drive unit
Type
Rear wheel motor
Free-wheel
Tyre size
28 inch
20 inch
Nominal power
250 W
250 W
Nominal torque
20 Nm
15 Nm
Max. torque
35 Nm
35 Nm
Nominal voltage
36 V
36 V
Cut-off speed
25 km/h
25 km/h
Permissible
ambient tempera-
ture in operation
-10 to +40 °C
-10 to +40 °C
Storage
temperature
-10 to +50 °C
-10 to +50 °C
Recommended
storage
temperature
18 to 23 °C
18 to 23 °C
Protection class
IP 54
IP 54
Weight
3400 g
3400 g
6.
Drive unit
6.1
Safety information
WARNING
Do not attempt any modifications to the drive unit. For example, it
is not permitted to raise the cut-off speed above 25 km/h. Pedelecs
with modified drive power may no longer comply with the legal
requirements of their relevant country. You may be liable to
prosecution if you ride on public roads with a 'tuned' pedelec. There
is also the risk of a technical failure. Modified bikes of this type are
excluded from the warranty and guarantee.
Always remove the battery before starting to work on the pedelec.
Accidental activation of the battery button can result in serious
injuries.
CAUTION
Do not open the drive unit. There is a risk of electric shock. It will also
invalidate any warranty claim. Only have repairs to the drive unit
carried out by trained cycle dealers.
Do not touch the motor after a long downhill ride – it can become very
hot. You could burn yourself if you touch it.
IMPORTANT
All components mounted on the drive unit, and all other drive
components, may only be replaced with identical components or those
approved specially for your pedelec by the manufacturer. Otherwise it
may result in overloading and damage.
