Focus Electrics Back To Basics 4500, Инструкция по эксплуатации

Страница: 3 / 20

3
B
EFORE
U
SING FOR THE
F
IRST
T
IME
Please check all packaging material carefully before discarding. Many
accessory parts are contained within the packaging material.
Before assembling your meat grinder wash all parts, except the motor base in
warm, soapy water, rinse thoroughly and dry. To prolong the life of your meat
grinder, do not wash parts in the dishwasher.
U
SING
Y
OUR
M
EAT
G
RINDER
Grinding Meat:
1. Place the head tightly into the motor base opening. Holding the head with one
hand, place the locking knob in the hole on the side of the motor base and
tighten by turning it clockwise.
2. Place the feed screw into the head; long end first, by turning the feed screw
slightly until it is set into the motor base.
3. Place the cutting blade onto the feed screw shaft with the flat side facing in.
Screw Cap
Cutting
Blade
Feed
Screw
Head
Sausage
Tube Collar
Cutting
Plates
Sausage
Tubes
Food Pusher
Reverse
Switch
Hopper Plate
“ON/OFF”
Switch
Locking
Knob