Foamit APW20HT, Руководство пользователя, Страница: 7 / 14

Model: APW20HT V20190916 • Page 7
Fire and explosion hazard.
No solvents, mineral spirits
or other flammable products.
Use only water based cleaners.
Drain parts of flammable contents.
!
FAULT
AT TEMP
Electrical shock
hazard.
Unplug unit before
servicing.
!
ON
OFF
ON
OFF
Assembling the Equipment
1 . Fasten the mounting feet into the
underside of the base. The mounting
feet should be at approximately the
same height.
2 . Place the base in the desired location.
3 . Using a level, adjust the mounting feet
until the base is level.
4 . Place the control box assembly onto
the base.
5 . Connect the sink quick connect hose
from the sink to the supply hose quick
connect from the pump.
6 . Place the sink on top of the base.
The equipment is shipped in two boxes, check that all the parts are included and undamaged. One box has
the complete Sink assembly (including Lid) and the other has the Base and Control Box Assembly. The Drain Grate,
Filter Bag and Mounting Feet are in a parts bag. Important! Locate the equipment in an area that has a hard, flat,
level surface and proper ventilation.
Follow these steps to install the equipment:
NOTICE
Operating the equipment with the protective packing material on the Control Box Assembly may cause damage to
the equipment. Remove the protective packing material on the Control Box Assembly and properly dispose before
using the equipment.
4
1
5
6
5