Foamit APW20HT, Руководство пользователя, Страница: 3 / 14

Model: APW20HT V20190916 • Page 3
1 Safety
WARNING
!
Failure to read all the instructions before operating the unit may result in personal injury or death from
the improper use of the chemical solution. Anyone handling, operating or using the unit must read,
and understand, the instructions in the manual. The buyer assumes all responsibility for safety and
proper use in accordance with the instructions.
Using, or servicing, the unit without proper protective clothing, gloves, and
eye wear may result in serious injury such as burns, rashes, eye, throat
or lung damage and death. Always wear protective clothing, gloves, and
eye wear when using, or servicing, the unit. Protect eyes, skin, and lungs
against drifting spray.
Using, or mixing, any amount of non-aqueous solvents (i.e.: alcohol, gasoline, petroleum or chlorinated
solutions) when using this equipment may cause explosions, fire, skin burns, fatigue, dizziness, serious
injury or death. Never add, mix, or use, non-aqueous solvents to the aqueous (water) based solution
when using or servicing this equipment. Always follow these instructions:
• Only use non-flammable / non-combustible aqueous based solutions with this equipment.
• Drain any non-aqueous solvent from parts before cleaning.
• Read, and follow, all chemical safety precautions and handling instructions provided by the
solution manufacturer and the Safety Data Sheet (SDS) associated with the solution being used
before using the equipment.
Splashing, spills, puncture of the sink or base may result in standing fluid and cause people to slip
and fall resulting in serious injury or death. Immediately cordon off the hazardous area to human and
vehicular traffic and clean up any standing fluid around the equipment. Always follow the guidelines
of the solution manufacturer and the Safety Data Sheet (SDS) associated with the solution when
disposing the material used to clean the standing fluid.
Movement of the equipment due to collision or repositioning may cause the equipment to tip-
over and result in serious injury or death. Install the equipment in a low traffic area away from
vehicular traffic lanes. Always ensure the equipment is level and stable before using or servicing the
equipment.
Overloading or imbalanced weight distribution of parts in the Sink may cause the equipment to tip-
over and result in serious injury or death. Always keep the total weight of the parks in the sink under
400 pounds. Always arrange the parts so their weight is evenly distributed.
Contact with hot surfaces may result in serious burns. Never touch the heating element while it is hot.
Always allow the heating element to cool down before handling.