Foamit APW20HT, Руководство пользователя, Страница: 6 / 14

Model: APW20HT V20190916 • Page 6
3 Installation
Locating the equipment in high traffic areas or vehicular traffic lanes may result in the
equipment being punctured or tipped over causing spills, standing fluid and cause
people to slip and fall, serious injury or death. Install the equipment in a low traffic area
away from vehicular traffic lanes.
System requirements
Incoming liquid temperature range
40-110 ˚F (4.4-43.3 ˚C)
Note: Heated operating temperature is 105 ˚F (40.6 ˚C).
Electrical requirements 120 VAC at 60 Hz, 15A
Operating voltage 120 VAC
Chemical compatibility
For use with aqueous solutions only. Chemical products
used with this equipment must be formulated for this type
of application and compatible with unit materials and pump
seals. For more information on chemical compatibility,
consult the manufacturer or SDS for your product or contact
our customer service department.
Power type Electricity
Chemical pickup type Draws from pre-mixed solution
Number of products unit can draw from One product
Fluid capacity 20 gallons (75.7 liters)
Output lines
FLOW-THRU BRUSH: 3 ft. (0.9 m) hose with 3/8 in. (9.5 mm) inside
diameter and flow-thru brush
FLEXIBLE RINSE LINE: 2 ft. (0.6 m) modular hose with 1/2 in. (12.7 mm)
inside diameter and 1/2 in. (12.7 mm) round nozzle
Flow rate 150 gph (567.8 l/hour)
Pump seals Viton
Heated operating temperature 105 ˚F (40.6 ˚C)
Filter bag 250 micron rating, size 4
Weight capacity Up to 400 lbs. (181.4 kg)
Overall exterior dimensions 33 x 25 x 65 in. (83.8 x 63.5 x 165.1 cm) with lid open
Sink interior dimensions 30 x 18 x 5 in. (76.2 x 45.7 x 12.7 cm)
Work surface height 36 in. (91.4 cm)
Foot type Four adjustable leveling feet
Certifications Conforms to UL Std. 1204, Certified to CSA Std. 22.2# 68
System specifications
WARNING
!