Foamit APW20HT, Руководство пользователя, Страница: 10 / 14

Model: APW20HT V20190916 • Page 10
Read and follow user manual and
warning to avoid rish and serious injury
or death.
Know hazards of your chemical. Read
and follow safety data sheets (SDSs).
!
R
I
N
S
E
B R U S H
Fire and explosion hazard.
No solvents, mineral spirits
or other flammable products.
Use only water based cleaners.
Drain parts of flammable contents.
!
ON
OFF
ON
OFF
LOW FLUID
AT TEMP
7 . Move the rinse/brush handle
towards the Rinse or Brush
Hose. Note: The in-line valve
can control the flow through the
Rinse Hose. Turning the in-line
valve fully to the right while the
rinse/brush handle is in the rinse
position will shut off the flow
completely.
8 . Clean the parts. Move the
handle to the center to use both
tools simultaneously.
9 . Remove the parts and repeat
steps 6 - 8 with additional parts.
10 . Monitor the drain grate and
filter bag for accumulated solid
waste. Monitor the solution
quality. Conduct maintenance if
needed (see Section 5: Cleaning
& Maintenance for more
information).
11 . Press the pump on/off switch
and turn the pump Off when
finished cleaning the parts (or
servicing the equipment).
12 . Press the heater on/off switch
and turn the heater Off when
finished cleaning the parts (or
servicing the equipment).
13 . Tap the lid spring towards the
front of the equipment and close
the lid.
R
I
N
S
E
B R U S H
Fire and explosion hazard.
No solvents, mineral spirits
or other flammable products.
Use only water based cleaners.
Drain parts of flammable contents.
!
Read and follow user manual and
warning to avoid rish and serious injury
or death.
Know hazards of your chemical. Read
and follow safety data sheets (SDSs).
!
In-line Valve
7
10
13
11
12