©2003 FoamFly.com
4
And of course even a foam plane needs a few odds and ends to tie
everything together. Take a few moments to inspect what you’ve you’ll need
here. As the items are called for you’ll get more info on their intended uses.
b) Non-Foam
Parts:
i)
Bamboo Skewers (4)
ii)
Wood Motor Mount
iii) Laser Cut Control Horns http://www.FoamFly.com/accessories.htm
iv) 18” x .032” Wire for pushrods (2)
v) 3/16” x 1/32” Wood Elevator Joiner/Wing Reinforcement (3)
vi) Double Stick Servo/Receiver tape (3)
vii) Wing Mounting Rubberbands (6)
viii) .055” Wire for Landing Gear
Now we get to begin the process. Before you cut or glue anything, I’ll say
this: Due to the nature of the raw materials available, you’ll notice that most of
the pieces have printing on one side. Now, you can do what you want, but I
recommend planning ahead so that you put all the printing towards the inside of
the plane. ;)
