©2003 FoamFly.com
14
g) Glue the Wing Struts to the bottom wing 9” from the center.
h) When dry, Glue the upper wing to the struts so they are the same 9”
from center.
8) Wing
Mounts:
a) Skewer the Fuselage as indicated on the fuselage diagram. (See
Appendix)
b) Cut eight 3/4” pieces of the wood strips,
c) Glue them to the front and rear of the upper and lower wings where the
rubberbands will cross the wings. Press them in until they are almost
flush with the leading edge of the wing, or you might need to sand the
fuselage a little to make the wings fit on.
