RTM x42.IO.Modbus Installation Manual and Operating Instructions
03.02.2020
4
subject to the following two conditions:
-
The device may not cause any harmful interference, and
-
This device must accept any interference received, including
interference that may cause undesired operation of the
device
Information about radio frequency radiation
This device complies with the FCC limit values for an uncontrolled
environment. This device should be installed and operated such that
a minimum distance of 20 cm is maintained between radiation
source and your body. This transmitter must not be operated near or
in connection with another antenna or transmitter
The function of this system is only ensured with the components in
the specified layout to one another. Otherwise, severe malfunctions
may occur. Thus, the installation information on the following pages
must be followed.
The local installation regulations ensure the safety of electrical
systems. They are not considered in these operating instructions.
However, they must be met.
Poor grounding can result in electric shocks for persons,
malfunctions of the overall system or damage to the control
electronics! Proper grounding must always be ensured.
It is of utmost importance to compensate for the centrifugal forces
generated through the rotation of the strander. Non-compensated
force-measuring rollers lead to faulty measurements.
Electrical connections must be implemented by an expert.
All system components are sensitive components that can be
damaged in the case of improper installation! Installation must be
performed by trained service personnel!
