RTM x42.IO.Modbus Installation Manual and Operating Instructions
03.02.2020
19
-
The calculated gain value is stored automatically
-
For other channels, repeat the steps
Press
to return to the main menu
For the calibration of the force sensor for the core can either be done via the measuring
amplifier connected to this force sensor or the EMGZ482R. If you do it via the amplifier,
please follow the instruction of the operating manual of the measuring amplifier.
5.3
Charger
Figure 13: Charger with battery
RTM_Ladegerät_Akku_10Ah_01.png
-
Connect battery to charger
-
The state of charge LED lights up red if the battery is discharged
-
The safety circuit protects the batteries from overcharging.
-
Charging is finished as soon as the battery pack reached its maximum charge
capacity. The charging process takes 3-4 hours.
-
The state of charge LED lights up green if the battery is charged
-
The battery must be connected in the battery compartment of the EMGZ482T prior
to start-up.
-
If a battery is not needed for the moment, it may remain in the charger
Flying parts
If the battery is not secured correctly, it can be ejected in the case of
rotating machines.
Secure the battery using the knurled screws. Tighten the knurled screws
sufficiently.
