FMS EMGZ307, Руководство по эксплуатации

Страница: 3 / 16

Operating manual EMGZ307
3
Table of Contents
1 Safety Instructions .................................................................................... 2
1.1 Description conditions 2
1.2 List of safety instructions 2
2 Definitions .................................................................................................. 3
3 System components ................................................................................... 4
3.1 Different EMGZ307 Variants 4
4 System Description.................................................................................... 5
4.1 Functional description 5
4.2 Force sensors 5
4.3 Measuring amplifier EMGZ307 5
4.4 Block
Diagram 6
5 Dimensions ................................................................................................. 7
6 Installation and Wiring ............................................................................ 8
6.1 Mounting and Wiring of the Electronic Unit 8
6.2 Mounting the Force Sensors 8
6.3 Wiring 9
7 Setting into Operation ............................................................................. 10
7.1 View of the Setting Elements 10
7.2 Settings for EMGZ307.582388 10
7.3 Configuring Gain and Offset 11
7.4 Configuring the Outputs 12
7.5 Configuring the Lowpass Filters 13
7.6 Calibrating the Measuring Amplifier 14
8 Trouble shooting...................................................................................... 15
9 Technical Specification ........................................................................... 15
2 Definitions
Offset:
Correction value for compensation of the zero point difference. Thanks to the offset, it
is ensured that a force of 0N will generate a signal of 0V exactly.
Gain:
Amplification factor for the measuring signal. Use of proper value will set the
measuring range of the sensor exactly corresponding to the signal output range
(0...10V).
Strain gauge:
Electronic component that changes its resistance when its length changes. Strain
gauges are used in the FMS force sensors for acquisition of the feedback value.