Operating manual EMGZ307
4
3
System Components
The EMGZ307 consists of the following components (refer also to fig. 1):
Force sensors
•
For mechanical/electrical conversion of the tension force
•
Force measuring bearing
•
Force measuring roller
•
Force measuring journal
•
Force measuring bearing block
Measuring amplifier EMGZ307
•
Hybrid module for supplying the force sensors and amplification of the mV signal
•
Robust design with compact aluminium housing (IP67)
•
Gain and offset alternatively configurable for infinitely or fixed adjustment
•
Freely configurable lowpass filter
•
Freely configurable outputs (±10V; 0...20mA; 4...20mA)
•
Supports connection of an external feedback display
(Components in italic letters indicate a variant or option)
3.1
Different EMGZ307 Variants
The tension measuring amplifier EMGZ307 is available in two variants:
EMGZ307:
Standard 1-channel analogue amplifier
EMGZ307.582388:
1-channel analogue amplifier for rotating applications.
Electronics board is covered with moulding compound to
secure the components and provide protection from centrifugal
forces.
Note
This manual describes the possible setting of the standard amplifier EMGZ307. Some
options, however, are not available in the EMGZ307.582388. For more details refer to
chapter 7 “Setting into Operation”.