FMS EDF Jet 70mm F-18F V2 PNP, Инструкция по эксплуатации

Страница: 3 / 44

3
H.
I.
F.
E.
G.
Contents of Kit
A: Fuselage
B: Main wing set
C: Vertical stabilizer
D: Cockpit
E: Horizontal stabilizer
Table of Contents
03
03
····················································· 04
··················································
···············································
·······································
·······························
·························
·········································
07
··················································
·························
·············································
08
···········································
08
···················································
09
Introduction
• High quality Predator 70A ESC,1850 KV in-runner motor
powering FMS’ latest 70mm 12-bladed EDF unit.
• Optimized screw-together construction,reducing glued components.
• CNC-machined landing gears with integrated shock absorbers.
• Pre-adjusted ball-link control horns for smoother surface movement.
• Includes 4 different decal sets for trim scheme customization.
A.
C.
D.
B.
Wingspan: 875 (34.45in)
Overall length: 1186mm (46.69in)
Flying weight: Around 2100g (74.08oz)
Motor size: Brushless 2860-KV1850
Wing load: 108 g/dm² (0.24oz/in²)
Wing area: 19.3 dm² (299 sq.in)
ESC: 70A
Servo: 9g Servo x 9
Specifications
EN
06
08
08
07
Introduction
Kit contents
Model assembly
Battery installation
Connectors diagram
Get your model ready to fly
Important esc and model information
The transmitter and model setup
Check the control throws
Clevis installation
Control horn and servo arm settings
Center of gravity(cg)
before flying the model
Flying your model
Troubleshooting
Spare parts list content
Decal instruction
06
·····················································
············································
······················································
10
10
11
09
07
···························································
Before assembly, please inspect the contents of the kit. The
photo below details the contents of the kit and labels.
If any parts are missing or defective, please indentify the
name or part number (refer to the spare parts list near the
end of the manual) then contact your local shop or email us:
support@fmsmodel.com
F : Missile set
G: Nose cone
H: Screws (HKM 4-3*16, HKM 4-3*26)
I : Wing spar
J : Auxiliary fuel tank
The F/A-18F Super Hornet is a tandem-seat, carrier-capable,
multirole fighter and attack aircraft based on the McDonnell
Douglas F/A-18 Hornet. Designed and initially produced by
McDonnell Douglas, the Super Hornet first flew in 1995. The
Super Hornet entered service with the United States Navy in
1999, replacing the Grumman F-14 Tomcat, which was retired
in 2006; the Super Hornet serves alongside the original
Hornet.
FMS is proud to present the 70mm F/A-18F with an unprece-
dented amount of innovative features and attention to scale
detail. Incorporating new and advanced construction and
assembly innovations such as the optimized screw-together
assembly(reducing glued components
)
, pre-installed ball links
and a heavy-duty wing spar, the Super Hornet is easily assem-
bled and disassembled. Based on the successful 64mm
F/A-18 hornet, the 70mm F/A18F Super Hornet features amaz-
ing details, clean lines, a latch-type canopy hatch and
CNC-machined landing gears with integrated shock absorb-
ers, just to name a few. Included with the model are four decal
sets, allowing your F/A-18F to turn more than a few heads at
the local field.
Powering the F/A-18F is FMS’ brand new V2 70mm 12-bladed
EDF with an 1850KV inrunner motor; when paired with a 6S
battery, unleashes a powerhouse of thrust along with a
turbine-like engine note.
Built with a durable EPO foam material, your F/A-18F is
durable enough to withstand hangar-rash and less-than-per-
fect landings. An environmentally-friendly water-based paint
ensures that the aircraft looks vibrant in any trim scheme.
Dominate the skies with your FMS 70mm F/A-18F!
J.
Key Features:
···························································