Operating manual BMGZ 600A
34
Time/date
Use:
The electronic unit has a built-in real time clock. To adjust the
clock, the actual time and date will be stored in this parameter.
This procedure provides for ex. switching between summer time
and winter time.
Date and time are printed on the charge protocols.
Range:
00:00 01.01.2000 to 23:59 31.12.2100
Gain roller 1/2
Use:
This parameter stores the value determined with
Calibration roller
1
. If automatic calibration cannot be proceeded, a manually
determined value can be inputted here.
Range:
0.100
to
9.000
Default:
1.000
Increment:
0.001
Unit:
[-]
Offset roller 1/2
Use:
This parameter stores the value determined with the tare
program (refer to „7.4 Tare program“) in [digit]. If the automatic
tare program cannot be proceeded, a manually determined value
can be inputted here.
Range:
-8000
to
8000
Default:
0
Increment:
1
Unit:
[Digit]
Belt length roller 1/2
Use:
This parameter stores the winding length of the belt of measuring
roller 1. This value is needed for the tare program.
Range:
1
to
5000
Default:
10
Increment:
1
Unit:
[m]
Diameter Roller 1/2
Use:
This parameter stores the diameter of the measuring roller 1
(refer to nameplate of measuring roller). FMS measuring rollers
have a standard diameter of 108mm.
Range:
10 to
1000
Default:
108
Increment:
1
Unit:
[mm]
Содержание BMGZ 610A
