FMS BMGZ 610A, Руководство по эксплуатации

Страница: 26 / 49

Operating manual BMGZ 600A
26
fig. 24: State diagram BMGZ620A B600022e
7.3 Setting the Installation-specific Parameters
For correct calculation of the flow rate, the following parameters must be set or
checked during initial operation (refer to „8. Parametrization“):
 Belt length roller 1
 Diameter roller 1
 Pulses roller 1
 Distance roller 1
 Nominal force roller 1
 Speed detection roller 1
 Speed belt roller 1 (if parameter Speed detection roll 1 is set to „none“

the speed will be 1m/s)
Using a evaluation electronic unit BMGZ620A (2 measuring rollers), the
parameters above must be set also for the 2
nd roller.
Note
The parameters above have direct influence to the accuracy of the belt scale. If
the values differ from the real installation conditions, a useful weighing result is
not available. Without inputting and checking of those parameters, the belt
scale should not be set into operation!