FMS BKS309.MS, Руководство по эксплуатации

Страница: 19 / 56

Operating Manual BKS309.MS
14.08.2018 19
8 Parameter Setting over the Front Panel
8.1 Basic Instructions for Parameter Setting
The web guide controller has three operator modes:
•
Operation mode
•
Parameter Setting mode (parameter selection)
• Change mode (set or change chosen parameters)
The parameter setting can be performed via the keys on the front panel or via a web
browser. When using the front panel, the user can toggle between these modes by
pressing a key or a combination of keys. The keys have the following functions:
Key Key function during parameter setting
Enter
Change the selections or increase / decrease the values
8.2 Setting of Operation Parameters
To enter the Parameter Setting Mode the web guide controller must be in the Manual
Mode. In the Automatic Mode only the reference value can be changed.
Press the key for longer then 3 sec. The LED will light and the first parameter
will appear on the LCD display. With the .keys the parameter list can be
scrolled up and down. By pressing the key again you will enter the parameter
setting mode. The select parameter on the display flashes indicating that it can be
changed.
The following state diagrams will help you to navigate through the Parameter Setting
menu.
Notes for the following state diagrams:
1)
Permanent pressing of the keys expedites the changing speed.
2)
The display shows the unit of measure that was previously selected.
3)
Parameter only used in winderGLIDE (actuator) applications
4)
This parameter change requires a restart of the web guide controller.