FMS BKS309.MS, Руководство по эксплуатации

Страница: 36 / 56

Operating Manual BKS309.MS
14.08.2018 36
Actuator [Actuator]
Purpose: The parameter
[Actuator]
determines the control logic of the web
guide controller BKS309.
Condition: This parameter appears on the display only if an actuator /
winderGLIDE is connected to the controller.
The user can choose between two control directions.
Action:
[Left]
Purpose: [Left] is the control direction when the actuator is mounted on the
left side of the unwind/rewind station seen in direction of the
running web (see Fig. 2)
Action:
[Right]
Purpose: [Right] is the control direction when the actuator is mounted on the
right side of the unwind/rewind station seen in direction of the
running web (see Fig. 2)
[IP Addr]
Purpose: The parameter assigns an IP address to the controller. This
enables the user to communicate via a web browser with the
controller that is imbedded in a network. The IP address must be
entered in 4 separate blocks (IP Bl. 1; IP Bl. 2; IP Bl. 3; and IP Bl. 4)
Range: 0 to 255 Default: 192.168.0.090
Increment: 1 Unit: [ - ]
[Subnet]
Purpose: The parameter assigns the Subnet Mask of the controller in the
Ethernet network. This enables the user to communicate via a web
browser with the controller. The Subnet Mask must be entered in 4
separate blocks (Sub. Bl 1; Sub. Bl 2; Sub. Bl 3; and Sub. Bl 4).
Range: 0 to 255 Default: 255.255.255.0
Increment: 1 Unit: [-]