FMS BKS309.MS, Руководство по эксплуатации

Страница: 30 / 56

Operating Manual BKS309.MS
14.08.2018 30
Setting:
Lock Guide [Lock]
Purpose: The motor drive is immediately locked when this parameter is chosen
and the digital input voltage is high.
Dig. Input Lock, Operation State Automatic and Parameter
[Auto → Man] work in a combinative manner. Their interdependency is
described in the following table:
Dig. In.
Lock
Op. State
Automatic
Parameter
Auto → Man
Function
0 inactive Centre Move to middle position
0 active irrelevant Automatic operation
1 inactive Manual Stop at actual position
1 inactive Centre Move to middle position
1 active irrelevant Stop at actual position
Setting:
Reset of Reference Value [ResetRef]
Purpose: This function resets the reference value to 0, if a positive signal edge
is applied to the digital input.
Setting:
Disabled
Purpose: With [Disabled] parameter the digital input is disabled.
DLS
Purpose: If you use a DLS2 sensor, you have to set the correct installation
direction. You can only connect one DLS2 sensor.
The user can choose between three settings.
Setting:
[none]
Purpose:
There is no DLS2 sensor connected
Setting:
[left]
Purpose:
The DLS2 sensor is installed on the left-hand side (in direction of the
moving web)
Setting:
[right]
Purpose:
The DLS2 sensor is installed on the right-hand side (in direction of
the moving web)