FMS BKS309.MS, Руководство по эксплуатации

Страница: 54 / 56

Operating Manual BKS309.MS
14.08.2018 54
11 Trouble Shooting
Error Cause Corrective action
Edge outside
detection band Edge has moved
outside the sensor
detection band Adjust sensor more accurately to the
web edge;
Adjust reference position less during
automatic operation
BKS guides web
edge immediately
out of the sensor Sensor is mounted on
the wrong side Mount sensor to the correct side (right
sensor for „Edge right“, etc.)
Sensor is connected
to the wrong socket Connect sensor plug to the correct
socket (left plug to left socket, etc.)
Steering frame
does not move No signal; sensor not
correctly connected Connect sensor correctly according to
screw terminal arrangement and
installation guide
No signal; cable
interruption Replace cable or send sensor to FMS
No signal; sensor
defect Send sensor to FMS; use other sensor
No response of
the interface Wiring not correct Check wiring
Display shows
nothing, frame
doesn’t react Fuse blown Replace Fuse on power supply board
Power supply defect Check or correct power supply
installation
Electronic control unit
defect Contact FMS customer service
Frame moves
abrupt to one of
the end positions Stepper motor driver
defective Exchange actuator of the frame.
Contact FMS service department for
spare parts and installation guide.