www.fmiproducts.com
121308-01F
18
INSTALLATION
Continued
Figure 27 - Installing Front Log (#3)
(Base may vary from illustration)
Front Log (#3)
Grate
Fingers
Notches
Figure 28 - Installing Crossover Logs
(#4 & #5) (Base may vary from illustration)
Pins
Crossover
Log (#5)
Crossover
Log (#4)
3. Locate the notches in bottom of front
log (#3). Place front log on grate fingers.
Make sure notches of front log line up with
grate fingers (see Figure 27).
4. Place left crossover log (#4) across logs #1,
#2 and #3 fitting holes on bottom of log #4
onto pin on front and middle logs as shown
in Figure 28.
5. Place right crossover log (#5) in the
same manner on right side of logs (see
Figure 28).
WARNING: You must operate
this fireplace with the fireplace
screen in place. Make sure fire
-
place screen is in place before
running fireplace.
