manualshive.com logo in svg

Flymaster GPS, Руководство пользователя, Страница: 36 / 58

Поделиться
Скачать
Flymaster GPS Скачать руководство пользователя страница 36

dynamic frequency on, the pitch of the beep may vary if the rate of climb varies during the individual

beep.

Buzzer

Is so called because of the sound it emits, which resembles a buzzing sound.

The buzzer sound is produced when the rate of climb is close to, but has not yet reached the specied

Climb threshold (see 13.3.1). This value is set between 0 and 9 with each unit corresponding to be 0.1

m/s, ie. 3 is 0.3m/s. Subtracting this decimal value from the climb threshold will give us the value at

which the GPS will start buzzing. For example with the GPS default values, Climb threshold=0.1m/s,

and Buzzer=3 (0.3m/s) the buzzing with start at -0.2m/s because 0.1 - 0.3= -0.2. In this case at 0.1m/s

directly below the Climb threshold the GPS will emit a constant sound varying rapidly in pitch from

around 100hz to the set base frequency at which the rst beep is emitted. This is the buzzer sound and

may resemble a growl noise. Setting the Buzzer value to O will disable the buzzer feature.

Although the Buzzer will sound very annoying on the ground it becomes an amazing companion in ight

allowing the pilot to pick-up thermals he would have usually missed.

Figure 4.24: Buzzer

A practical example of the advantages of the buzzer feature can be illustrated in Figure

4.24

In this

example both pilots are sinking at -1.0 m/s. The orange paraglider has a GPS for which the climbing

threshold is set to 0.1 m/s and the Buzzer parameter is set to 3 (0.3 m/s). The green paraglider has a

typical vario for which the climbing threshold is set to 0.1 m/s.

As shown in the gure, when both pilots enter the thermal nothing is heard. The air is rising at 0.1 m/s

but both pilots are descending at -0.9 m/s. In the second zone of the thermal the air is rising at 0.8 m/s,

and so pilots are descending at -0.2 m/s. At this stage the orange pilot starts to hear the Buzzer brrrrr

sound of his GPS , which helps him to center the thermal, while the green pilot is still unaware of the

thermal. Finally, in the 3 zone, the air is rising at 1.2 m/s, and so both pilots climb at 0.2 m/s. The

GPS pilot starts to hear his vario beep... beep... sound, and it is only at this point the green pilot hears

the rst beep from his instrument.

Auto Silent

Setting Auto silent option ON will keep the GPS 's buzzer quiet until a Start Flight has been detected.

(see Section

1.7

) This function avoids listening the vario sound while waiting to take o. The audio will

then be kept active until the GPS is switched o. The default value for the auto silent parameter is ON.

Start Speed

The start speed is one of the Start Flight conditions, and it is used to dene the minimum GPS speed, in

Km/h, that should be reached in order to initiate the ight. Note that the Start Flight event is important

to many other functionalities, so care should be taken when setting this value. For example, if

Auto Silent

is on, the vario will only beep after the ight starts. The track data is also only saved after the ight

starts.

35

All manuals and user guides at all-guides.com

all-guides.com

Содержание GPS



























































Отзывы:

Нет отзывов