Flymaster GPS Скачать руководство пользователя страница 17

Страница: 17 / 58

3.2 Data eld Elements

Data eld elements can be used to shown numerical information like altitude, vertical speed, speed, glide

ratio, and many others.

These elements have congurable size, and position, although the text within has only 3 possible sizes.

The folowing table explains the available data elds. As the GPS rmware evolves this list will likely grow.

Table 3.4: Data elds Description

Field ID

Description

VMG

Velocity made good, is the speed at which the pilot is approaching

the active turn point.

Longitude

Current position longitude according to the format dened in the

settings menu.

SpeedToFly

Optimal Speed to Fly value calculated according the McCready

Theory. The True Air Speed value is calculated based on the

dened polar and the average thermal speed.

McRdyNxtThrm

Next thermal expected average speed calculated based on the Mc-

Cready Theory. Considering the dened polar it calculates the

speed next thermal should have if you are ying at a certain mea-

sured True Air Speed (TAS Probe needed). This value is related

with the Speed to Fly and is shown graphically in the Double Bar

Vario.

Latitude

Current position latitude according to the format dened in the

settings menu.

Ceiling

Shows the upper altitude of the airspace causing the warning, i.e.

airspace that you are violating or close to violating.

Floor

Shows the lower altitude of the airspace causing the warning, i.e.

airspace that you are violating or close to violating.

Time

Current local Time. This value is automatic revised when the

device gets a valid Gps Signal. (see Note 2)

Dur.

Flight Duration. Duration of the current ight.

Date

Current date. This value is automatic set when the device gets a

valid GPS Signal

G.R.Next

Glide Ratio to Next. Necessary glide ratio to reach the next turn

point.

Cur.G.R.

Current glide ratio calculated using the average vario value, and

average ground speed.

G.R.M.G.

Glide ratio made good. The actual glide ratio towards the active

turn point. It is calculated using the integrated vario, and the

VMG.

Trans.G.R.

Glide ratio during transition. Average glide ratio during transi-

tions between thermals.

Alt.Gain

Altitude Gain. Altitude gained in current thermal.

Alt.Gain/Loss

Altitude Gain/Loss. When at the top of the thermal displays the

altitude gained from the base of the thermal, else displays the

altitude lost since reaching the top of thermal.

Therm.Dur.

Time pilot has spent in the most recent thermal.

Thrml.Perfo.

Perfomance of the most recent thermal showing average rate of

climb in most recent thermal.

Dist.Next

Distance to Next. Shortest distance to the waypoint center. Dis-

tance next corresponds to the Distance Line plus the waypoint

radius.

Active waypoint

Active turnpoint name.

Thermal top

The highest point reached during the current thermal.

Continued on next page

All manuals and user guides at all-guides.com

Содержание GPS



























































Результаты поиска

Содержание GPS

Отзывы:

Похожие инструкции для GPS

Бренды по названию

Популярные бренды

Flymaster GPS, Руководство пользователя

Результаты поиска

Содержание GPS

Отзывы:

Похожие инструкции для GPS

Бренды по названию

Популярные бренды