Flight manual
MD3
RIDER
Page 4-6
4.9.2. On Final
- airspeed
110 - 115
km/hod
- power
adjust as needed
- engine instruments
check
- wing flaps
landing position
(position II or III according to need)
- trim
trim
- check of landing site
situation
4.9.3. Landing
At a height of about 30 ft reduce the engine speed to idle. Maintain
speed of 115 km/hod till the flare. When flaring at a height of 1 to 2 ft
above ground, decelerate gradually by pulling the control stick
backward till the aircraft touches-down.
Save immediately hit of front undercarriage by continuing of slowly
control stick pulling.
4.9.4. After landing
- brakes
apply when necessary
- wing flaps
retract
4.9.5. Engine stopping
- power
cool down the engine at 2,000 rpm
when necessary
- avionics and other switches
off
- ignition
off
- master switch
off
- fuel tank valves
shut
- secure the aircraft : brake aircraft by using of brake lever parking
position, chocks or other way to prevent the
aircraft from movement, lock the controls (using
safety belts)
4.9.6. Post-Flight Check
Check the overall condition of the aircraft.
4.10. Short field takeoff and landing procedures
Normal procedures are to be followed, use second landing flaps setting
together with approach speed
100 - 110
km/hod for short field landing.
