Flight manual
MD3
RIDER
Page 8-2
CAUTION - Be careful - Set the ailerons and flaps into the neutral
( 0° ) position before folding them to prevent the undesirable
stressing of the connecting parts and control levers
With aileron control rods disconnected and front wing hinges pins
dismounted the wing can be turned to push on the leading edge to the
rear. Flaps control will be disconnected itself during movement.
Repeat the procedure with the second wing
For the transportation, we recommend to put the dismantled pins into
the loosen forks of the wing hinges again and to lock them.
8.2.
PARKING AND MOORING
8.2.1. General
Always secure the aircraft when parked. It is recommended to moor
aircraft in worse weather conditions or when the aircraft is left
unattended (overnight etc.)
Ground equipment:
- pressure sensor plug of the pitot static system
- securing set for mooring
- fabric covers
8.2.2. Pressure sensor plug for the pitot static system
Pitot static system has to be protected against blowing air through by
means of a rubber plug put on the input pipe of the pressure sensors.
The plug is provided with a red flag.
