Beijing Flyingvoice technology Co.
,
53
6 Functions
6.1 Making Calls
◆
Dial the number directly and wait for 5 seconds (default No Key Entry Timeout).
◆
Dial the number with ending char #, G201N4 will dial out immediately
◆
Dial the phone number which matches one dial rule, G201N4 will dial out immediately, no
need to press # or wait for 5 seconds.
6.2 Call Waiting
Step 1.Enable waiting feature in SIP-->Line1-->supplementary Service→Call Waiting (default is
Enable)
Step 2.While in conversation, user will hear a special stutter tone if there is another incoming call.
Step3.User then can press “*77” (or Flash button)to put the current call party on hold
automatically and switch to the other call. Pressing “*77”(or Flash button) toggles between two
active calls.
6.3 Call Hold
Step 1.While in conversation, pressing the “*77”(or Flash button), will put the remote end on
hold.
Step 2.Pressing the “*77”(or Flash button) again, will release the previously Hold state and
resume the bi-directional media.
6.4 Call Transferring
G201N4 supports blind transfer and attended transfer.
6.4.1 Blind Transfer
Assuming that call party A and party B are in conversation, A wants to Blind Transfer B to C
Step 1.Party A dials *98, A will hear dialing tone
Step 2.Dial party C’s number, and press # (or wait for 5 seconds) to call C, then C will ring, A will
be disconnected.
Step 3.If C answer the call, B and C can go on talking.
