Beijing Flyingvoice technology Co.
,
50
Field Name
Description
Provision Enable
If or not enable provision.
Resync on Reset
If or not enable resync after DIV378 restart
Resync Random
Delay(sec)
Set the maximum delay for request the synchronization file, default is 40.
Resync Periodic(sec)
If the last resync was failure, G201N4 will retry resync after the “Resync Error
Retry Delay ” time, default is 3600s.
Resync Error Retry
Delay(rec)
Set the periodic time for resync, default is 3600s.
Forced Resync
Delay(sec)
If it’s time to resync, but G201N4 is busy now, in this case, G201N4 will wait
for a period time, the longest is “Forced Resync Delay”, default is 14400s,
when the time over, G201N4 will forced to resync.
Resync After Upgrade
If or not enable firmware upgrade after resync, by default it is enabled.
Resync From SIP
If or not enable resync from SIP.
Option 66
It is used for In-house provision mode only. When use TFTP with option 66 to
realize provisioning, user must input right configuration file name in IP542N's
webpage. When disable Option 66, this parameter has no effect.
Config File Name
It is used for In-house provision mode only. When use TFTP with option 66 to
realize provisioning, user must input right configuration file name in IP542N's
webpage. When disable Option 66, this parameter has no effect.
Profile Rule
URL of profile provision file
Note that the specified file path is relative to the TFTP server’s virtual root
directory.
