manualshive.com logo in svg

FLYGT APP 541, Руководство пользователя, Страница: 30 / 76

Поделиться
Скачать
FLYGT APP 541 Скачать руководство пользователя страница 30

Menu

Values

Description

Parity COM1
(15_14)

None, Even or

Odd

Use the same setting as in the communication equipment.

Protocol COM1
(15_15)

AquaCom dialled
Modbus dialled
Comli dialled

 

Station number / id
(15_1)

001–899

In the SCADA system, the station number is a unique number for the

RTU.

Telephone no. CS/SMS
(15_3)

Enter the telephone number to the SCADA system or MTC-COM.

NOTICE:

If you connect a terminal to the service port in the RTU, you can specify the modem
initialization with the command setcomdata

.

Format: setcomdata <modem init\>

GSM modem and SMS

Communication using a GSM modem. The RTU can be monitored by the SCADA system in
this configuration. However, alarms are sent directly to cell phones as SMS. (Reference:
Observe the limitations for combinations of modems and their configuration strings as
described in the Modem Configuration manual).

Menu

Values

Description

Communication COM1
(15_10)

GSM/Hayes

predef.

Configure the modem using a PC and select GSM/Hayes predefined.

Speed COM1
(15_13)

1200-115200 bps If your modem supports autobauding, set this as high as possible to

get the best communication performances.
Otherwise set this value to the same as the value used in the pre-

configuration of the modem.

Parity COM1
(15_14)

None, Even or Odd Use the same setting as in the communication equipment.

Protocol COM1
(15_15)

AquaCom/SMS

 

Station name
(15_2)

 

Enter a name that will be sent in the SMS alarm message.

Telephone no. CS/SMS
(15_3)

Enter the first telephone number to the SMS recipient, i.e. the

personnel.

Telephone no. SMS 2
(15_4)

 

Telephone number to SMS receiver. The telephone number is

required for alarm handling to more than one SMS receiver.
Only applicable when alarm handling using SMS is selected.

..

..

Telephone no. SMS 5
(15_7)

Telephone number to SMS receiver. The telephone number is

required for alarm handling to more than one SMS receiver.
Only applicable when alarm handling using SMS is selected.

Configure Communication

28

APP 541 User manual

Содержание APP 541













































































Отзывы:

Нет отзывов