31
EN
1. All quick release skewers must be
firmly closed before you set off.
2. Check all quick release fasteners for
correct attachment if the vehicle was
parked even for a short time without
supervision and before every ride.
3. A closed quick release fastener must
be folded close to the frame, fork or
seat post.
Lock down wheels or other parts of your
vehicle that are attached with quick re-
lease fasteners when you park your bi-
cycle.
Quick release axles
The current chassis is either equipped with quick
release fasteners, screw connectors or quick re-
lease axles that work in the same way as uick
release fasteners:
The axle is screwed into the dropout and holds
the hub between the fork legs. The hub and the
axle are fastened with a uick release le er. Sys
-
tems in which the axle is only inserted or screwed
in and then fastened with a screw also exist.
Refer to the attached component manufacturer
instructions and allow your FLYER specialist re-
tailer to explain the system to you in detail.
Ask your FLYER specialist retailer to
explain in detail how the wheels and all
relevant parts are to be correctly and
safely attached using the quick release
fastener or uick release axle system
installed. .
Loosening the Adjusting Nut
Tightening the Adjusting Nut
The quick release fastener cannot be closed
when the tightening force is too high. Open the
clamping lever in this case and slightly loosen the
adjustment nut.
