MAX OWNER’S MANUAL VER . 2.0
___________________________________________________________________________
©
Copyright di
FLY
Products
s.r.l.
Pagina
26
INTERVAL
INSPECT
REPLACE
During and after
Break-In
All screws, nuts, bolts, prop cage,
netting, harness webbing, etc.
Every 5 hours
All screws, nuts, bolts, prop cage,
netting, silent-blocks, reduction belt,
etc.
Spark Plug, check color is light brown.
Check spark plug cap.
Every 25 hours
All screws, nuts, bolts, prop cage,
netting, etc.
Clean, re-gap spark plug
fuel filter
Every 50 hours
De-carbonize Cylinder head.
reduction belt
Spark Plug
Every 100 hours
Piston ring, piston pin, piston
pin bearing and pin keepers.
Secondary pulley bearing
Every 200 hours
Crankshaft bearings
Piston and cylinder assembly,
all bearings and crankshaft
seals
Yearly
(regardless of hours)
Fuel pump and carburetor
diaphragms. Crankshaft seals and
condition of all plastic and rubber
parts.
Fuel hose, fuel filter,
reduction belt, silent-blocks
Remember…
…that YOU are ultimately responsible for your motor and it’s proper care,
FLY PRODUCTS and it’s
dealers assume NO responsibility for any engine problem resulting from improper use!
Before leaving the factory each motor has been tested for up to 30 minutes to insure that it is in proper
running order and all FLY PRODUCTS units are guaranteed up to six months after purchase. The
extraordinary maintenance or repairs will do only by authorized personal.
FLY PRODUCTS will replace any defective engine parts during the six months period after purchase.
Note that any electric parts that are damaged for improper use or modified in any way which could cause
an engine malfunction are not guaranteed.
Regular checks obligation.
In Germany the PPG (only with empty mass less than 120 Kg.) must not be checked once a year, it
depends on the manufacturer. Most of them declare: must be checked once a year by a qualified person.
We too align with this behaviour and recommend you to check it once a year!
Содержание MAX 100
Страница 1: ...MAX 100 and MAX 130...
