background image

MAX  OWNER’S  MANUAL                                                                                   VER . 2.0 

___________________________________________________________________________ 

© 

Copyright di  

FLY 

Products 

s.r.l.                                                                                 

Pagina 

  25 

6.0

 

   

PACKING YOUR MAX  TO TRAVEL

 

  Disassembling for local travel 

For local travel in a car, only partial disassembly is necessary.  This disassembly includes removing the 
prop cage and prop.   

  Disassembling and packing for long-distance travel 

Disassembly and packing for long-distance or airline travel requires complete disassembly of the 

MAX

and then packing into a suitably padded and protected box for travel.   

Fuel Tank drain 

  For airline travel, make sure you completely drain the tank, and wipe the inside dry by inserting a paper 
towel and thoroughly drying tank. 

NOTE!

  Make sure you check, and comply with, FAA regulations as well as regulations of the specific 

airline that you are travelling before taking the machine aboard an airliner. 

Draining All Fuel 

With the fuel tank completely drained, start the engine and allow it to idle until it stops running.  At this 
point, all of the fuel will have been removed from the carburetor and fuel lines. 

Removing The Harness 

Unlock the top two harness triangular carabiners . 

Remove the distance bars from their seating . 

Remove the ground handling straps by threading the lower straps up through the buckles. 

This completes the harness removal. 

Cage Disassembly 

Remove the cage in the inverse order as described before 

 

 

 

 

 

 

7.0

 

   MAINTENANCE

 

  

Periodic maintenance is required in order to keep your 

MAX 

 in top operating condition.   

The following chart provides the suggested maintenance schedule. 

 

Содержание MAX 100











































Отзывы:

Похожие инструкции для MAX 100