GMI-ROT Series - Absolute Rotary Encoder
User Manual
WARNING
:
changes made to the ENCODER not previously agreed with
the manufacturer, will void any liability of the manufacturer
himself, from any damage caused to things or people, resulting
from the use of the ENCODER.
5.5 Decommissioning, disassembly and demolition
5.5.1 Decommissioning of the
ENCODER
To put the
ENCODER
out of service for a long time, perform the following operations:
●
check that
all power supplies to the
ENCODER
have been suitably removed
(including any external
control power supplies
and including any power supplies
concerning the
mechanical system controlled by the
ENCODER
) and that no one can
inadvertently reactivate them (use of padlocks, appropriate signs and consolidated work
procedures);
●
check that any
residual energies
have been discharged before carrying out the
interventions, including
residual energies
concerning the
mechanical system
controlled by the
ENCODER
;
●
wait for all surfaces to cool down.
5.5.2 Disassembly
In the event that it is necessary to disassemble the
ENCODER
, perform the procedure
indicated below.
1.
Remove the power supply to the
ENCODER
.
2.
Referring to Chapter 4, uninstall the
ENCODER
; furthermore, contact the Manufacturer's
Technical Offices to obtain the necessary assistance during this intervention.
DANGER:
the Manufacturer declines all responsibility for any
damage to property and / or persons deriving from
improper
interventions
carried
out
by
unqualified,
untrained,
inadequately
equipped
or
unauthorized
personnel.
FLUX GmbH - Austria
2022-04, rev00
31/34
