Flux GIM-ROT-055, Руководство пользователя

Страница: 20 / 34

GMI-ROT Series - Absolute Rotary Encoder
User Manual
Attention to follow during use
During use, it is necessary to follow the precautions described in this paragraph.
●
Do not try to reach drives, even if in stop condition.
●
Operate the ENCODER only if all the protection and safety devices are intact.
●
Observe all safety and danger warnings.
●
Wear all the necessary PPE , regularly checking its integrity (immediately reporting the
PPE is no longer able to perform the specific task).
●
Do not use the ENCODER in conditions other than those indicated in the Intended Use
paragraph.
●
Use the ENCODER ensuring compliance with the technical specifications shown on the
dedicated technical data sheets attached to this document, according to the specific
ENCODER configuration.
●
Use the ENCODER ensuring compliance with the mounting tolerances, according to the
specific ENCODER configuration.
●
Use the ENCODER ensuring compliance with the electrical data, according to the
specific ENCODER configuration.
●
Use the ENCODER ensuring compliance with the maximum mechanical speed,
according to the specific ENCODER configuration.
●
Always wait for any overheated parts to cool before intervening on the ENCODER .
●
Keep people wearing devices such as heart pacemakers away from the ENCODER .
●
Do not try to reach any moving parts. Do not try to reach drives, even if in stop condition.
●
Do not intervene on the ENCODER without having read this manual completely and
carefully.
●
Use auxiliary equipment and, in any case, any other machinery, tool or utensil only after
having understood the indications given in the relevant Use and Maintenance Manuals
or after having followed specific and formalized training.
●
Immediately report abnormal operating situations.
●
Do not perform any intervention (including cleaning) with the ENCODER in action or
electrically powered or near hot surfaces.
●
Do not try to make the ENCODER perform unauthorized operations (refer to the Proper
use paragraph).
●
Do not install or place equipment / pipes / channels on the ENCODER .
FLUX GmbH - Austria
2022-04, rev00
20/34