Flux F 424 HC, Оригинальное руководство по эксплуатации

Страница: 36 / 60

36 / 60 Main Operating Instructions for Barrel and Container Pumps
ENGLISH
7 Operation
7.1 Safety instructions
Attention!
• Make sure that the operator has read and understood the operating instruc-
tions.
• The operator must be instructed on proper use before operating the pump.
• Only use the pump for the intended use.
• The pump should not be immersed deeper into the liquid than the outlet con-
nection.
• Never leave the pump unattended.
Material damage
• If the material of the pump or the quick action tap (housing, valve, seal,
hose...) are not resistant to the liquid to be transferred, it must not be used.
Observe the chemical resistance chart.
• Avoid dry running.
Caution!
Risk of injury!
• Follow internal instructions.
• Wear protective clothing
(face and breathing protection, protective gloves, etc.).
Danger from splashing liquids!
• The maximum operating pressure and operating temperature must not be
exceeded.
• High operating pressure may result in the containers or the hoses bursting
or becoming loose. Make sure that excessive pressure does not result when
filling a container.
• Keep in mind the air escaping and the displacement when the pump is
immersed in the liquid. Lower the pump carefully.
• Fill carefully and at an appropriate speed to avoid leakage of the liquid.
• After the filling, allow the excess to drip off the quick action tap. There may
be liquid left in the outlet tube, which will then leak out.
• Install appropriate splash guards for open barrels or containers.
• Empty the pump, hose and fittings prior to removing the motor.
• In case of counter-pressure, do not remove the motor or use a pump with an
inner tube lock.
• Remove spilled liquid from the floor and dispose of it in an environmentally
sound manner.