Fluke TS 1200, Руководство пользователя

Страница: 19 / 44

2-11
Using POTS Mode
Answering a Call To answer an incoming call:
1 If a ringing signal is received, go to the POTS screen and press
F2 - Talk . The test set automatically tests for high-speed data on the line.
2 If no data is detected, the test set will go off hook.
3 If data is detected, the test set will lock out and alarm.
4 To go off hook with data present (this would most likely be an ADSL
line), press
F1 - Ovride .
To disconnect a call, press F2 - Hangup.
Speed Dial To use speed dial:
1 Press SPD Dial key.
2 Highlight desired location with Up/Down arrow keys or number keys.
3 Press F1 - Dial. The test set will go off hook and dial the selected number.
Note
Pressing and holding F3 - ERASE will erase the speed dial
entry.
To edit an existing stored number:
1 Select number to be edited with Up/Down arrow keys or number keys.
2 Press F2 - Edit.
3 Move cursor to either Name or Number using Up/Down arrow keys.
4 Press F2 - Bkspce. Cursor moves backward to delete existing information.
Note
For alphanumeric entry, use the standard phone keypad.
Q and Z are assigned to the 0 key, and a SPACE key
assigned to the asterisk (
∗
) key. To select between the 3
letters of a key, the user presses the key multiple times
(e.g., to obtain a C, the 2 key is pressed three times).
5 After the entry is complete, press F1 - Save .
Note
Speed Dial numbers DO NOT automatically go into LNR
memory. For example, you call someone who is not in
speed dial, hang up, and call someone using speed dial.
When you hang up again and press LNR you will dial the
first person who was not in speed dial.
-continued-