Fluke TS 1200, Руководство пользователя

Страница: 16 / 44

2-8
TS1200 Test Set
Users Guide
Using POTS Mode
Note
Pressing the Home key at any screen returns you to the Home screen.
POTS mode can be entered by selecting 1 on the Home Screen (the first screen displayed upon
powering up the unit) or by pressing the POTS/ADSL key.
POTS Mode Features
Monitor Mode
Monitor mode is for audio monitoring of the Tip and Ring pair while on hook. In Monitor mode,
the test set has a high input impedance, which allows monitoring of the line without disrupting
conversations or data signaling if present. The test set draws no direct current from the line and
it transmits no signals to the line.
In the Monitor mode, the test set is typically used to perform one or more of the following
procedures:
•
Verification that a line is idle when looking for a line to borrow
•
Listening for noise on the line
•
Hunting for tracer tones
•
Performing a test for the presence of high frequency data on the line
Saving Test Results The user can save the test results or print out the results. Save Results can be
selected from either Auto or Manual Test.
To save or print the results:
1 From the Showtime Test Results screen, press
F3 - Exit.
2 Press F1 - Yes.
3 Press
F2 - Edit.
4 Move cursor to either Name or Number using Up/Down arrow keys.
5 Make entry and press
F1 - Save
. The results are automatically saved.
See “Downloading Stored Results to a PC” for instructions on sending stored
results to a PC.