Fluke RUSKA 7252, Руководство пользователя

Страница: 65 / 128

Local Operation
Menu
4
4-25
Changing an Existing Program
Instructions for changing an existing sequence are given below. Both manually and
automatically generated programs may be edited.
1.
Programs are changed from the Program Menu . From the Main Menu (press
Previous until the Main Menu appears), press Menu [ F6 ] | Program [ F4 ].
2. Use the rotary knob to highlight the name of the program.
3. Press Edit [ F4 ]. The program editing screen will appear as a table showing all of
the steps.
glb34.bmp
Figure 4-22. Channel A: Menu | Program | Edit - Menu
4. The rotary knob can be used to move through the program and highlight the value
you wish to edit. Use the keyboard to enter a new value. This value will show up in
the scratch pad located at the bottom of the window. Press Enter to accept the edited
value.
5. To add a step to the program, first move to the step after the new step. For example,
to insert a step between steps 3 and 4, move to step 4. Press Insert [ F4 ].
6. To delete a step in the program, first move to the step to be deleted, then press
Delete [ F5 ].
7. When all changes have been made, press PREVIOUS to return to the Named
programs screen. The Calibrator automatically saves the changes that were made in
the program.