Fluke RUSKA 7252, Руководство пользователя

Страница: 45 / 128

Local Operation
Tutorial
4
4-5
glb17.bmp & glb16.bmp
Figure 4-5. Units - Menu
2. Use the rotary knob located to the right of the display to move the highlight bar to the
desired unit.
Note
The highlighted curser initially shows the current unit of measure. When
the rotary knob is moved, the current unit remains highlighted in a gray
color, and the new unit is highlighted in a light blue color.
3. When the unit desired is highlighted, press the ENTER key on the far right side of
the front panel, under the numeric keypad. The display will return to the MAIN
screen with the current units.
The second part of this tutorial uses the Calibrator to generate pressure. The pressure
supply must be connected and the test port must be connected to a closed volume, in
accordance with Chapter 3, Pneumatic Connections, of this manual.
4.
From the Main Menu, use the numeric keypad to enter the starting pressure. The
pressure is entered in the units set in the previous exercise. As the pressure is entered,
each digit will be displayed in the numeric scratchpad (the highlighted box in the
lower section of the display). If a mistake is made, press the CLEAR key (found in
the numeric keypad), and the numeric scratchpad will be cleared.
glb18.bmp
Figure 4-6. Generating Pressure: Main Menu