Fluke Pan Tilt System, Руководство пользователя

Страница: 50 / 63

Pan Tilt System
Users Manual, Rev. 1.0, May 2020
50
Figure 7-12: Patrol Page
7.2.9 Motions Recall
In the Motions Recall menu item, you can specify the time intervals after which the pan tilt system will execute
certain functions.
•
Type: This parameter selects the function to execute once the time interval of inactivity is up. The
functions which can be activated are Home, Autopan and Patrol.
•
Timeout: This parameter specifies the duration of the inactivity interval.
•
Cyclic Re-calibration: This parameter specifies after how many hours the system must execute a new
axes calibration procedure. Sets value 0 to disable the function.
Figure 7-13: Motions Recall Page
7.2.10 Preset
From the menu entry Preset a number of parameters relative to the presets can be configured:
•
Scan Speed: The speed, measured in degrees to the second, at which a preset is reached by explicit
operator request.
•
Speed of Movements Default: The speed used in autopan and patrol operations.
•
Impose Default Speed: The default speed will also be set as the scanning speed for all presets.
•
Default Dwell Time: The amount of time, in seconds, it stays in each preset by default.
•
Impose Default Pause: The default pause will be set for all presets.