Fluke Pan Tilt System, Руководство пользователя

Страница: 24 / 63

Pan Tilt System
Users Manual, Rev. 1.0, May 2020
24
3.1 Positioning
System location depends on the application. Before deciding on a location, you need to be aware of the ambient
temperature of the location, the atmospheric quality of the location, and the possible electromagnetic interference
in that location. Wiring and conduit runs must be considered, including computer wiring and connections, if used.
3.2 Distance to Object
The camera provides different lens models to accommodate a wide range of applications. Each individual lens
provides different thermal images (Field of View) and minimum detectable pixel sizes (Instantaneous Field of View).
The optical diagram below shows the principal graphical representation for measuring distance over the field of
view. The manufacturer provides a tool for calculating image sizes, see section 10.1
Field of View Calculator ,
page 62.
Figure 3-1: Field of View for the Camera
3.3 Bracket Mounting
Take special care when attaching and fastening down the apparatus. The clamping system
must be able to support at least 4 times the weight of the entire equipment, including pan
tilt head, lenses and camera.
The device should be assembled vertically. Any other position will impair the performance
of the appliance.
Do not attach the device upside down.
Different types of supports are available, see section 8 Accessories , page 55. Choose a suitable bracket for the
installation.
Minimum detectable spot size
(Instantaneous Field of View)
Thermal Image
(Field of View
)