Fluke Pan Tilt System, Руководство пользователя

Страница: 47 / 63

Configuration
Web Interface
47
7
Addressing:
•
IP version: IPv4
•
Address Type: STATIC
•
IP Address: the pan tilt head is preset with the following address 192.168.42.136
•
Subnet Mask: 255.255.255.0
•
Gateway: e.g. 192.168.42.1
DNS: disabled
NTP Server : It is also possible to specify if the device needs to be synchronized with an external NTP (Network
Time Protocol) server.
•
DISABLED: Select this option if you do not wish to synchronize date and time of the device.
•
DHCP: Select this option if you wish to synchronize the date and time of the device with those of an NTP
server (Network Time Protocol) indicated by the DHCP server.
•
STATIC: Select this option if you wish to synchronize date and time of the device with those of the NTP
(Network Time Protocol) server specified by the static address.
PC Sync : This allows you to synchronize the date and time of the product with that of the PC that you are using
(you need to re-execute the command after each unit switch on-off cycle).
Figure 7-8: Network Page